Posts

The Starting-up Tips of Centrifugal Pump

Image
If you 're interested in our products, please don't hesitate to contact us. Tel:+86-21-64092786   E-mail: export@croospump.com 1.  Periodic inspection of centrifugal pump The periodic inspection of centrifugal pump can be divided into the following three types: 1) Daily inspection, i.e. the inspection in use, as described above; 2) Monthly inspection, cleaning and repair of the equipment appearance without disassembling the parts, including the inspection of bearing temperature, shaft seal leakage and motor insulation condition; 3) Preventive maintenance. Including replacement of shaft seal lubricants, check pump and motor pairs, check the wear of the shaft sleeve, and check the damage to the rubber ring of the coupling, clean mechanical seal, coolant filter and pump filter, check the wear condition of sliding parts, check the corrosion of the contact fluid. 2. The p repare before starting In order to ensure the safe operation of the pump, necessary inspection sh

Various Misunderstandings in the Use of Centrifugal Pumps

Image
If you 're interested in our products, please don't hesitate to contact us. Tel:+86-21-64092786   E-mail: export@croospump.com 1.  Low lift operation of high lift water pump Many people think that the lower the lift, the lower the motor load. In the misleading of this false knowledge, when the water pump is selected, the pump's lift is often high. In fact, for centrifugal pumps, when the pump model is determined, the power consumption is proportional to the actual flow of the pump. The flow of the pump decreases with the increase of the lift, the higher the lift, the smaller the flow and the less power consumed. Conversely, the lower the head, the larger the flow, the greater the power consumption. Therefore, in order to prevent the motor overload, it is generally required that the actual pumping use of the pump shall not be less than 60% of the nominal lift. When the high lift is used to pump water too low, the motor is overloaded and hot, which can burn the m
Image
Here's detailed information about " APA Type Chemical Process Water Pump ". If you have any doubts, please contact me. ( Tel:+86-21-64092786   E-mail: export@croospump.com ) APA series single stage end suction pumps are designed according to ISO5199 and ISO2858 standard, mainly be applied for chemical process water or liquid with fewer solids, hot water, ethyl alcohol, sugar refinery and other industrial process water and sea water. There are three different impeller type can be chosen according to different request: closed, semi-open and open impellers. Design Feature of : Similar appearance with GE series end suction pump but added strengthen tendon on the casing to ensure that suitable for multi-request for chemical process request. Design strictly according to ISO5199 and ISO2858 design, every part can be interchangeability with other same standard brands. Back pull-out design and contact the pump and motor through coupling for easy installing and dismantl

HM Type Submersible Water Pump With Mixer

Image
Here's detailed information about " HM Type Submersible Water Pump With Mixer ". If you have any doubts, please contact me. ( Tel:+86-21-64092786   E-mail: export@croospump.com ) Description of Submersible Mixer Pump: OHM series are Non-Clog Electric Submersible Pumps for Sludge, Sewage, Trash & Industrial Waste      The OHM pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solid up to 90% of pump outlet diameter. The solid die 25-70mm can go through from the pump channel. BLADE CUTTER  Consists of a rotating and stationary cutter, utilizing a standard impeller.  • Minimal energy consumption (4% or less) for solution • Designed to break up clogs/ragging  • Hardened cutter material  • Adjustable clearances  • Minimal flow restrictions  • Does not change external pump dimensions  • Retrofittab

OH Type Submersible Water Pump

Image
Here's detailed information about " OH Type Submersible Water Pump ". If you have any doubts, please contact me. ( Tel:+86-21-64092786   E-mail: export@croospump.com ) OH are single stage, single suction pumps with the overhung nonclogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint. Pump casing: The radially split casing is provided with delivery nozzle cast integrally with it. Suction is axial and the delivery nozzle is central and horizontal. Specially designed" cutter fan " to agitate liquids easy sediment. Wide volute passage ensures non-clogging operation of the pump. Impeller: Impellers are of the non-clog type which allows smooth passage of solids. Impellers are with double vanes in enclosed,  channel type Cutter Fan is option

RAP Series Stainless Steel Vertical Multistage Centrifugal Inline Pump

Image
Here's detailed information about " RAP Series Stainless Steel Vertical Multistage Centrifugal Inline Pump ". If you have any doubts, please contact me. ( Tel:+86-21-64092786   E-mail: export@croospump.com ) RAP series closed coupled stainless steel vertical multistage centrifugal inline pumps are driven by standard motors. All parts contact with water made of SS304. The pump head, suction and discharge part can be made in cast iron on request too. The pressure-resistant cylinder and flow passage components are fixed between the pump head and inlet & outlet section with four stay-bolts. With high reliability, high efficiency and advanced technology, these pumps are capable of satisfying multiple applications in the water market.  Design Feature: 1.The main parts such as an impeller, diffuser, and stage are pressed and joined by a stainless punch, with very smooth flow channel, high head, high efficiency, anti-corrosive and super powerful operating time, pr

HM Type Horizontal Multistage Centrifugal Pump

Image
Here's detailed information about " HM Type Horizontal Multistage Centrifugal Pump ". If you have any doubts, please contact me. ( Tel:+86-21-64092786   E-mail: export@croospump.com ) HM series is the horizontal multistage ring section pumps and high pressure pump. all the impellers are stacked in single direction on the same pump shaft. The rotors are perfectly dynamically balanced and the maximum stages can be up to 12 stages. HM type horizontal multistage ring section pumps has advantage of stable performance and superior in quality. HM type horizontal multistage pump is the ideal for high pressure pumps application, for water and drinking water supply system, general industry, pressure boosting system, irrigation system, in power station, heating, filtration, fire-fighting, reverse osmosis and washing plants....etc. Design feature : Long-coupled Rolling element and plain bearing for higher temperature The suction nozzle and discharge nozzle can be horizo