NMZ Type Horizontal Split Case Centrifugal Pump

Here's detailed information about one of our products"NMZ Type Horizontal Split Case Centrifugal Pump". If you have any doubts, please contact me (Tel:+86-21-64092786 E-mail: export@croospump.com)

NMZ series are horizontal, single stage, axially split case, double suction, between bearing, centrifugal pumps. It's suitable for pumping clean water or slightly contaminated water or liquids which is physically and chemically similar to water, where large quantity and certain head are required. The axially split casing design makes it’s easy to remove the upper volute casing and rotary components without disturbing the motor and the pipework. And the double suction impeller ensures high efficiency.

Horizontal Centrifugal Pump Design Features:

• Axially pump casing

The casing is axially split, the inline suction and the discharge nozzles are in the lower half casing,  this design makes it’s easy to remove the upper casing and rotary components without disturbing the motor and the pipework.

• Dual Volute Casing

Pumps generating high heads have dual volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads.

• Between bearing design

Less shaft deflection due to the between-bearing design. 

• Wear Rings

Easily replaceable casing wear rings, protect the pump casing from the abrasion of the impeller. The overall cost of operation is minimized.

• Sealing Flexibility

Pump can be sealed by gland packing or wide range of mechanical seals

Horizontal Split Case Pump Operation Data:

50Hz		60Hz
40 to 500mm	Discharge Diameter	1.6 to 32 in
50 to 11,600m³/h	Capacities	220 to 51,073 USgpm
Up to 260m	Heads	Up to 656 ft
Up to 2.5MPa	Pressures	Up to 362.6 psi
Up to 120° C	Temperatures	Up to 248 ° F

Horizontal Axial Split Casing Pump Application:

Water transport
Water supply and distribution
Irrigation, drainage and flood control
District cooling/heating
Fire fighting

Horizontal Split Case Centrifugal Pump Material Available:

Pump Part	Material Combination
	Cast Iron	Ductile Iron	Carbon Steel		SS 304	SS 316L	Duplex		Super Duplex	Bronze
Casing	Cast Iron	Ductile Iron	Carbon Steel		SS304	SS316	Duplex		Super Duplex	Bronze
impeller	Cast Iron	Ductile Iron	Carbon Steel		SS304	SS316	Duplex		Super Duplex	Bronze
Shaft	SS 420			SS304		Duplex		Super Duplex
Seal housing	Cast Iron	Ductile Iron	Carbon Steel		SS304	SS316	Duplex		Super Duplex	Bronze
Stationary Ring	Carbon Steel				SS304	SS316	Duplex		Super Duplex